J1 Plug (6 position male plug w/ female pins) / 12 INCH
J1-1 shift lock output common (14 AWG White)
J1-2 shift lock output N/C (14 AWG Red)
J1-3 shift lock output N/O (14 AWG Black)
J1-4 +12V input lift door open, this appears to be an option not addressed in the wiring diagram, its included as a loose wire with pin. If you need it, it will be in the J1 plug bag (14 AWG Pink) if needed
J1-5 ground input lift door open (14 AWG blue)
J1-6 ground input park brake set (14 AWG brown)
Cost: $14.44
_______________________________________
J2 Plug (3 position male plug w/ female pins) 12 INCH
J2-1 ground input from transmission in park (14 AWG white)
J2-2 ground connection for trans park (14 AWG white)
J2-3 ground connection for trans park (14 AWG white) it's included as a loose wire with pin attached, if needed.........the pin pusher to extract a pin from the plug costs more then the complete harness cost!
Cost: $11.45
_______________________________________
J4 Plug (5 position male plug w/ female pins) 12 INCH
J4-1 lift door dome light output (12 AWG blue)
J4-2 low side lift power (Braun, I assume this is a lowside driver) note: remove lift power fuse. No connection for ricon high side driver, (14 AWG white) it's included as a loose wire with pin attached, if needed.
J4-3 to lift power relay (12 AWG red) this will carry the most load so we upgraded it to 12 AWG wire)
J4-4 input ignition (14 AWG yellow) yellow has always been the standard ignition color in RV's so we stick to it when designing........
J4-5 power ground (12 AWG black)
Cost: $13.95
_______________________________________
J5 Plug (4 position male plug w/ female pins) 12 INCH
J5-1 flashing light output 1 (14 AWG blue)
J5-2 flashing light output 2 (14 AWG blue)
J5-3 flashing light output 3 (14 AWG blue)
J5-4 buzzer or intellitec module (14 AWG pink)
Cost: $12.95
________________________________________